Where is Innotouch used?
A touch-up coating for cut edges, fastening damage and small repair areas on galvanized products.
Corrosion-resistance enhancement and appearance restoration of damaged galvanized areas
Corrosion Protection at Damaged Areas
Zinc and aluminum constituents interact with the coated surface to protect scratched, darkened or oxidized areas against further corrosion.
Protective Ceramic Layer
The inorganic binder forms a dense protective layer over the damaged area to impede corrosive agents.
Bright Metallic-silver Appearance
The bright-silver finish is designed to blend with galvanized surfaces and reduce the visual contrast of repaired areas.
Safety Information
No xylene, toluene or ethylbenzene. Available documentation includes Korean consumer chemical product safety results with 7 non-detected items and a separate report with 26 non-detected substance test items.
Salt spray test (SST) corrosion-performance comparison
In the referenced salt spray comparisons under the same conditions, Innotouch-treated specimens outperformed their hot-dip-galvanized-only counterparts.
| Specimen System | Test Method | Result |
|---|---|---|
| Hot-dip galvanized flat specimen alone | KS D 9502 (5% NaCl·35℃) | White and red rust across the surface at 480 hr |
| Hot-dip galvanized flat specimen + Innotouch | KS D 9502 (5% NaCl·35℃) | No abnormalities at 480 hr |
| Hot-dip galvanized threaded rod alone | KS D 9502 | Black and white corrosion products at 48 hr; red rust across the surface at 912 hr |
| Hot-dip galvanized threaded rod + Innotouch | KS D 9502 | No abnormalities at 912 hr |
Based on the comparative test data published in the product catalog.
Localized corrosion repair, appearance restoration and clear topcoating
KEMP's aerosol repair system combines G·SAVE corrosion-protection layer formation, Innotouch appearance restoration and G+PLUS clear topcoating. The sequence integrates protection of exposed steel with final protection of the repaired coating.
02
Innotouch
Touches up scratches, darkening and other visible defects with a bright metallic-silver finish.
03
G+PLUS
Provides a final clear inorganic-binder finish over the repaired area.
Localized galvanized-surface repair and fastener corrosion protection
Repair coating for scratches and black staining
Repairs visible damage to galvanized surfaces caused during transport or installation.
Threaded Rods and Other Fasteners
Adds corrosion protection to bolts, nuts and other fastened areas.
Finishing After G·SAVE Repair
Supplements appearance restoration and protection at repaired areas.
Areas Requiring a Bright-silver Finish
Restores a bright-silver finish where the appearance of hot-dip galvanized components matters.
420 ml Aerosol
18 L Pail
180 L Drum
Innotouch: Key Questions
Considerations for local repairs requiring a bright metallic finish.
How does it differ from G·SAVE?
Innotouch emphasizes a bright metallic-silver appearance and convenient local touch-up. G·SAVE focuses on restoring corrosion protection in damaged areas of structures.
How can the actual color be checked?
Color matching depends on the existing substrate and surface condition. Confirm the actual finish with a sample application.
Discuss your Innotouch application
Tell us the application area and damage condition to discuss use and specifications. Catalogs, test results and other technical documents can be requested.